| photo |
Title |
Updated |
 |
YWJ-8T test vertical honeycomb extruder
Main technical parameters: 1. Extrusion force: 80KN2. Rated working pressure of oil cylinder: 26Mpa. 3. Barrel specification: 60150. 4. Oil cylinder diameter: 635. Oil pump: 10L pump set 6. Oil tank storage capacity: 50L.
|
2016-11-06 |
|
YWJ-15T vertical hydraulic extruder
Main technical parameters 1. Extrusion force: 150KN2. Rated working pressure of oil cylinder: 25Mpa. 3. Barrel specification: 125300. 4. Oil cylinder diameter: 1005. Pressure oil: N46 hydraulic oil. 6. Fuel tank storage
|
2016-04-03 |
|
TL-125 vacuum extruder
Technical parameters 1. All materials in contact with mud should be made of 304 stainless steel. 2. Drive motor: 11KW. 3. Frequency converter control:. 4. Upper shaft double shaft: spiral diameter Φ80
|
2016-04-03 |
|
YWJ-80T arbitrary tilt angle hydraulic extruder
This equipment is a series of equipment specializing in the production of honeycomb ceramics. The extrusion pressure can be selected from 50200T. The inner diameter of the barrel can be selected between 100 and 50MM, and can be developed and produced according to the special requirements of customers.
|
2016-02-28 |
|
YWJ-15T small arbitrary tilt angle hydraulic extruder
This equipment is domestically original and is suitable for extruding various shapes of honeycomb ceramics and solid and hollow ceramic products. The main machine can be adjusted to any angle. It is easy to use and can be pumped twice in the barrel.
|
2016-02-28 |
|
ZQJ-310 vacuum extruder
The ZQJ-310 vacuum powerful extruder is used for the production of honeycomb ceramic products, especially suitable for the production of titanium dioxide material honeycomb products. This machine adopts an upper and lower two-layer structure, each with special
|
2016-02-28 |
|
TL-300 vacuum mud training machine
The TL-300 vacuum slime machine has a unique design. All surfaces in contact with the material are made of stainless steel. The reamer shaft and the extrusion part are equipped with a water circulation cooling system, which can be opened in half for easy cleaning.
|
2016-02-28 |
|
YWJ-120T hydraulic extruder
It is used to extrude solid, hollow and honeycomb ceramic products with various cross-section shapes.
|
2016-02-28 |
sell